Reid's Triple T

Information

DIMENSIONS
Wheelbase:60 in
Front Axle Clearance:13in
Shipping Weight:2,222lbs.
Turning Radius With Brakes:2.8 m

SPECIFICATIONS
ENGINE:
Number Of Cylinders:3
Rated Engine Speed:2400 rpm
Engine Model:3TNV88F-EPJT1
Engine Manufacturer:Yanmar
Family:EYDXL1.64NDA, FYDXL1.64NDA, GYDXL1.64NDA
Power Take-Off (Pto) Power:19.4 hp
Injection Pump Type:Direct Injection
Emissions Compliance:Final Tier 4
Cylinder Liners:Cast-In-Block
Compression Ratio:19.1:1
Gross Power:24.7hp
Lubrication:Pressurized
Cooling System:Water pump
Air Cleaner:Dual element
Engine Torque At Rated Speed:53.4 lb-ft.
Displacement:100.1cu in
Aspiration:Natural
Fuel Tank Capacity:6.3gal
Bore:3.5in
Stroke:3.6in
FLUID CAPACITIES:
Crankcase With Filter:4.7 quarts
ELECTRICAL:
Battery Size:500 CCA
Alternator (12-V):55 amp
Starter Size:1.9 hp
FUEL SYSTEM:
Fuel System Type:High pressure common rail direct injection
POWER TAKE-OFF(PTO):
Standard 540 rpm at 2500 rpm
Control:Independent
Clutch:Independent
Brake (For Mid And Rear PTO):Wet Disc
Transmission:Cruise Control Optional
Standard Transmission: Forward/Reverse
Hydrostatic transmission (HST)
Brakes:Wet Disc
STEERING:
Power Steering
Axle Capacity:Front - 1760lb., Rear - 2640 lb.
Creeper:No
Differential Lock:Yes
Final Drive Type:Bull Gear
TIRES:
Front:Farm - 7-14, Turf - 27x8.5-15, R4 - 25x8.5-14
Rear:Farm - 11.2-24, Turf - 41x14-20, R4 - 15-19.5
HYDRAULIC:
Maximum Operating Pressure:2500psi
Draft Control Sensing:Position control
Remote Control Valves Available:Up to two (optional)
Pump Rated Output: Steering - 4/gpm, Implement - 5.3/gpm
Pump Type:Dual gear
Hydraulic Type:Open Center
FINAL DRIVE:
Final Drive Type:Bull Gear
3-POINT HITCH:
Category:Category 1
Lift Capacity, 24-In. Behind Link Arms:1356lbs.
OPERATOR STATION:
Rollover Protective Structure:Foldable, ASABE S478
Platform - Flat/Straddle:Semi-flat
Gear Shift Location - Console/Floor:Left Hand Side